Chris where have you been hiding?
6 Likes
Got distracted building 600 all wheel horsepower car… still got my garden though how you been @Mpower11
6 Likes
Welcome back! 
4 Likes
TY so much friend
1 Like
Update: Still experiencing some problems with my electricity and cant setup new tent until its permanently fixed.
Going into flush so I can dismantel the 2X4
3 Likes
Electrical problem suck big fat toes I went a few weeks with out it and then the wifi problem hopefully you get it running soon
4 Likes
All good here the same old… Trying my current grow using LOS… Always wanted to try it out!!
2 Likes
Thanks T2g, it does suck toes, especially when you have to go to the basement in the middle of the night to turn the light off! So I’m definitely gonna figure it out!
3 Likes
Hope u do quick that has to be a pain in the butt 
2 Likes
I see some nice colors
3 Likes
TrolMaster has released the newest version of the Hydro-X Pro (HCS-2) firmware that has addressed previously reported problems as well as to add some great new features including:
-
Added 4 channels Spectrum Control for ThinkGrow Model-I plus LED.
-
Daylight Saving mode and Auto / Manual time clock control selectable.
-
Combined Line 1/2 options in DLI control.
-
Add dimming Min/Max setpoints for the DLI control.
Please make sure your unit is connected to the internet in order to be able to complete an update using our cloud server.
Warning:
This update will conduct a factory reset to prevent potential glitches. The factory reset will erase all the current setting and historical data from your device. (Historical data will still be accessible on the web-based program. Please follow the instructions below to save the setting on a USB driver and restore your setting after update.
-
You will first want to save your current settings on a USB driver that is 32gb or less
-
Insert the USB driver into the controller USB slot on the lower left corner.
-
Go to the system tab on the upper right corner of the HCS-2.
-
Select Import / Export.
-
Select Export all Settings.
-
Select the path to save the file to the USB card, then name the file.
-
Select Export… controller shows “Export Settings Complete”. Your settings are now backed up on the USB drive.
-
Go back to the Settings page then select System Reset - Firmware Update - Select the “cloud” update
-
When the unit completes installing the update, the unit will restart
-
Once the unit restarts, select the Setting page, then select System Reset- Factory Reset and complete the factory reset.
-
When the unit completes the factory reset, the unit will restart.
-
Once the unit restarts, select the Settings page, then select Import / Export.
-
Select Import all settings. Next you will find and select the backup filename you saved earlier.
-
Select Open and then Select Import. Your settings will be restored, and your controller is ready to function.
PS. For the Daylight Saving Time issue, you could adjust your device to correct UTC time zone or turn on the DST button to correct the system time.
Regards
TrolMaster Support Team
TrolMaster Agro Instruments Co., Ltd.www.trolmaster.comTel: +1(877)-420-9876 1112 Eagleridge Blvd Pueblo, CO 81008
4 Likes
Wow 
I was looking at those just waiting on getting it cause like I told @Mpower11 i have a lot to learn yet with the co2 an everything u guys are using but hopefully soon enough with All u guys help
3 Likes
I’m not using CO2 @Mpower11 is a seasoned crop grower and is more advanced than most, I’m like you, just learning what I can a little at a time!
I do prefer a simple way of growing with just a bit of automation to keep me from working too hard to enjoy a grow!
I have many things to fix about my grow before I purchase the trollmaster pro but I’m looking forward to it.
5 Likes
Co2 I wouldn’t recommend for anyone until they have there RH/Temps mastered first… You can inject Co2 without RH/Temps mastered, it will not hurt the plants just you will be spending $$$ without much of any gain…
Veg with Co2 for me is easy to pull off… When I change to flower and I start pushing around 1300 Watts of LED power the heat kills me because I have to exhaust (lose my Co2)… I’m missing a A/C system in my setup to solve my Co2 problem… I just don’t really want to go down that road.
A lot of the time I even think it more of a hassle than it worth
4 Likes
Everything is a trade off, whether it be for time or moola
1300 w is a lot of heat 
Could heat your basement with that lol
5 Likes
You need to be pushing at min 600 Watt Led or 1000 watt HPS in a 4 by 4 tent if you want to get the most out of your Co2
lol it’s true last winter I heated my whole basement with my exhausted heat
5 Likes
Yea me as well ur pretty advanced with this I think 
everyone can always learn more but u are definitely nice as well
3 Likes
I guess it helped ur gas 
bill yea I do remember u telling me u really didn’t want to go down that road so what would be the alternative for that then
2 Likes
What I’m going to try this time but I’m really not to confident it will solve the problem 100% but we will see. I added a second AC duct in my room from my house AC system not my tent just the room my tent is in… All return ducks are closed off in that room…
I going to exhaust into the room making the room hotter hoping the extra AC duck into the room will keep it colder… So yes I’m wasting Co2 into the room but hoping to be able to reuse when the Carbon fans turn on… Mind you Grobo may get a small bonus out of it since it’s in the room…lol
For standby power if the room gets to hot I have a 6 " carbon fan setup to exhaust heat and now Co2 out of the room to outside… (this part is 70% setup right now)
Hoping this all makes sense…lol
3 Likes
it does sounds very challenging tho I would like to hear 
the end result what’s the temp u looking for
1 Like