How do I take the side panel off

[Static]

Trying to take the side panel off so I can get to the pump… My Grobo is still not draining or feeling and I wanted to check the connections. Any help would be appreciated.

[pyromancy]

You should be able to get the side panel off after first removing the back panel as far as I know:

@LtcTerps

Do you have any tools handy. Take a look at the screws and figure which tools u need and have at it. I’ve done it and will most likely do it again. Once you get the back panel off the left side would be next. Then you will have access to drain and fill hoses. Ull need to grab some thin zip ties because the old ones will get cut when u swap hoses. Took me roughly 30 min or less to get mine apart and fixed. Good luck it’s fairly easy

@LtcTerps

It’s easy to get back and side panels off with Phillips head and square. Don’t use power tools, hand tools only. The circuit board is located bottom left of grobo. Taking the back panel off will let u look at that circuit board. U’ll most likely have to take off left panel to really handle those wires which can be tricky(grobo door has to open to remove so make sure ur unlocked before unplugging and disassemble). I had same issue with unplugged wiring.

So it sounds like you should OPEN your Grobo door, I would imagine possibly then turn off the power to be safe? and then remove the back panel and then the side panel which will give access to the drain and fill hoses if I’m reading this advice above correctly.

I only imagine turning off the Grobo would be the safe thing to do electronically o_O

[Todd.grobo]

Unplug after unlocking.
Unscrew top from front and back
Then back or side can come off. Side requires use of the door